Napa, CA PEX-Copper Repiping and Slab Leak Repairs

A Repipe is the procedure where the old water pipes in a home or a building are upgraded with new ones. All water line fittings, stop valves and supply lines are exchanged. this usually produces greater water pressure and more favorable water quality.

Should I Repipe the house in Napa?

Many reasons exist for why a person might need to upgrade the water lines of your house.

For households with galvanized piping:

Galvanized piping are located in houses built in the 80s. A galvanized pipe is an iron water line which is coated with zinc for corrosion protection. However the zinc coating steadily corrodes over time revealing the iron material, accompanied by corrosion build-up.

Popular Slab Leak Evidence:

Very Low Water Pressure – The reason why may be the limitation of the water flow caused by rust and corrosion build-up inside of the galvanized water line.

Rust Color Water – Rust frequently finds it’s way to the fixtures. This means a high level stage of oxidation in your pipes.

Leaky Pipes – Leaks are a consequence of corrosion of the galvanized iron pipes. Concealed leaks may develop in the walls, inside the attic as well as underneath the residence, building up the risk of considerable damage to the home and property.

For houses with polybutylene water pipe:

This particular plastic water pipe was used in the middle of the 70’s to the early 90’s. At the time it was considered to be the next great advancement for plumbing and fittings. Polybutylene water line systems had already been installed in millions of households before it was discovered to be highly substandard. Approximately 65% of homes built in this time frame continues to have this variation of pipe in the house.

Polybutylene pipes have an enormously brief life span, considering that chemical compounds in common city-provided water causes it to firm up and change into brittle. The fittings generally burst first, and then the water pipe itself.

Polybutylene water lines are made up of flexible plastic piping, gray when for indoor use and blue or black outside. Certain fittings are made with plastic and metal. Insert fittings are then used to join up sections of polybutylene pipe.

For homes with copper plumbing in the slab.

Slab leaks originate from copper or other pipes becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through the foundation.
  • Water sounds like it is running even when the faucets are off.
  • Your water meter shows the water is running regardless of whether the water is shut off.
  • Extraordinary higher water bills.
  • Next door neighbors already have experienced a leaking slab.
  • You have experienced a slab leak before.

Attributes of Copper Repiping

  • More significant water pressure
  • You can eliminate rusty or bad tasting water
  • Clean, crystal clear water
  • The ability to turn on several faucets simultaneously
  • High quality water pipes without any more leaky water lines.
  • No scalding skin while in the shower if someone else turns on your faucet or flushes.
  • More satisfaction when your piping system is secure.
  • Effective selling feature for your property.

When you employ a local plumber or other provider to perform the job, it’s most likely going to set you back more in the long term when you consider that you’ll have to retain the services of a drywall repair service provider to patch over the various repair points. When you hire a repipe company that has a master patcher on staff such as Repipe Specialists, you’ll never have to pay out additional money or valuable time in getting your home back to normal. From start to finish, the PEX and Copper repiping procedure requires just a few days.